Soluble Fibres & Prebiotic Carbohydrates · Core range
Partially Hydrolyzed Guar Gum (PHGG)
Partially hydrolysed guar galactomannan · CAS 9000-30-0 (guar gum basis) · Partially hydrolysed guar gum, spray-dried powder
A partially hydrolyzed guar gum for soluble fibre without viscosity, with the fibre method, DP profile and low-viscosity behaviour stated.
SW-049 Reviewed 20 November 2026 5 technical documents
- Dietary fibre
- ≥85.0%
- Minimum order
- 1 kg
- Indicative sweetness
- <5% of sucrose; essentially non-sweet
- Indicative lead time
- 3–10 days
Specification
What the certificate will report
| Dietary fibre | ≥85.0% (AOAC 2009.01) |
|---|---|
| Appearance | White to off-white powder |
| Moisture | ≤6.0% |
| pH (1% solution) | 4.0–7.0 |
| Solubility | Soluble in water; low viscosity |
| Particle size | ≥95% through 80 mesh |
| Ash | ≤1.0% |
| Viscosity | Low; specified for the grade |
| Heavy metals | Pb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | Partially hydrolysed guar galactomannan |
| CAS | 9000-30-0 (guar gum basis) |
| Marker set | PHGG fibre ≥85%, low viscosity |
| Appearance | White to off-white powder |
| Solubility | Soluble in water; low viscosity compared with native guar gum. |
Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.
Sweetness and application
What the grade tastes like
| Indicative sweetness | <5% of sucrose; essentially non-sweet |
|---|---|
| Taste note | Clean, almost neutral; useful where the fibre must not change the flavour or the viscosity. |
| Starting use level | 2–10% in beverages and foods, depending on the fibre target |
| Blend behaviour | Blends with inulin, FOS and polyols; adds fibre without viscosity. |
Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →
Indicative profile curated from the published taste note. Confirm it in your matrix.
Process fit
Soluble in water
Stable in dry form
Stable across normal food pH
Hygroscopic
Ordering
Entry quantity, packing and sample
Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.
Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.
Technical documentation
Five documents, one standard.
Quality and procurement pages for Partially Hydrolyzed Guar Gum (PHGG). Each card opens the full document; a sample COA and the technical data sheet are available on request.





What to confirm before ordering
- Confirm the fibre method, viscosity and guar source.
- Check dispersion and mouthfeel at the target dose.
- Confirm the exact identity, carrier and particle size for Partially Hydrolyzed Guar Gum (PHGG) before the first order.
- Taste at the target sucrose equivalence in the real matrix, not in water alone.
Buyer questions
Practical answers
What is Partially Hydrolyzed Guar Gum (PHGG) specified to?
Dietary fibre: ≥85.0% (AOAC 2009.01). The full specification adds Appearance, Moisture, pH (1% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which fibre method and DP profile is this?
The catalog grade is Partially hydrolysed guar gum, spray-dried powder. The fibre figure is method-specific, and the degree of polymerisation decides the viscosity, solubility and sweetness. The grade page sets out the analytical basis and the forms.
Which applications does this grade fit?
Beverages, Dairy, Supplements, Bakery, Confectionery. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the purification system
- Specification comparison against the specification you sent
Next step
Send the spec. We will confirm the form.
A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.