Buyer FAQ · 24 answers

Straight answers, before the first email.

The questions that come up in a supplier review, grouped by the stage at which they are asked. Each answer is limited to what the specification, the document pack or the published regulation can support.

Start with the eight most-asked

  1. Which documents come with a sweetener lot?
  2. What does the primary specification line mean?
  3. What is the minimum order?
  4. How is a lot released?

Documents

Documents questions

Which documents come with a sweetener lot?

A batch-specific COA, a technical data sheet, a safety data sheet, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be added where the buyer's review requires them.

What is the difference between a specimen COA and a batch COA?

A specimen shows the format: parameter, method, release limit and the place where a result is printed. A batch COA carries the lot number and the measured result for that lot, signed against the specification agreed in the quotation.

Does the COA name the analytical method?

Yes. Every result is paired with the method used to produce it. A result without a method cannot be compared with another supplier's certificate, and a calculated figure names the assays it comes from.

Can you issue a specification comparison against our current grade?

Yes. Send the specification or a recent COA. We compare the identity, assay basis, method, moisture, particle size, contaminant limits and document pack line by line, and state where we cannot match.

Do you provide allergen and GMO statements?

Yes. The statements cover the major allergen list, gluten, animal-derived inputs and GMO status, signed for the batch. For protein sweeteners such as thaumatin, the allergen assessment is part of the file.

Can the TDS state sweetness and taste data?

Yes. The TDS gives an indicative sweetness versus sucrose, the taste notes at a named use level, the solubility and the recommended storage. Those figures are a starting point; the final test is the finished matrix.

Specification

Specification questions

What does the primary specification line mean?

It is the figure that decides the grade: an assay, a glycoside content, a mogroside content, a fibre content or a polyol purity. The label on the specification names the figure and the method behind it.

Why does the assay basis matter?

The same lot reads differently on an as-is, dried or anhydrous basis. The basis is part of the specification, and a comparison that ignores it can make two equal grades look different or two different grades look equal.

Can you match the sweetness of another supplier's grade?

We can match the specification and the use level, but sweetness is matrix-specific. The useful brief is the target sucrose equivalence, the pH, the process and the other sweeteners in the formula. We test against that brief.

What particle sizes are available?

Most products are supplied at 80 mesh or 60 mesh, with granular and micronized grades available on request. For tabletting, dry blends and tabletop, the particle distribution should be stated on the purchase order, not assumed.

Do you supply liquid grades?

For several products, yes: sucralose, FOS, GOS, XOS and polydextrose are available as liquids or syrups. A liquid grade has a different active content, water activity and preservation requirement, and the specification states all three.

Can you supply organic grades?

For some stevia, monk fruit, erythritol, inulin and selected fibres, an organic-certified grade can be quoted when the certificate and the lot traceability are available. Organic status is confirmed for the exact grade and lot.

Samples & MOQ

Samples & MOQ questions

What is the minimum order?

One kilogram, packed from a released lot with that lot's COA. Bulk quantities are packed in 25 kg fiber drums or paper sacks with a food-grade liner. Development grades are quoted against the smallest batch that can be released.

How do samples work?

Samples are typically 100–500 g, dispatched within 3–5 business days after the specification is agreed. The sample carries the COA of the lot it was drawn from, so the bench trial and the future shipment are the same material.

What is the typical lead time?

Most catalog grades dispatch within 1–7 days after specification and order confirmation. Custom mesh, carrier or documentation can add time before the lot is released. The quotation states the lead time for the exact grade.

Can you supply a custom blend?

Yes. A blend of two or more sweeteners or a sweetener with a carrier can be developed against a written specification. The blend ratio, the carrier, the homogeneity and the assay of each active are part of the specification.

How is the material packed for export?

The standard pack is a 1 kg foil pouch or a 25 kg fiber drum with a food-grade liner. Pallets, drum marking and the document pack are prepared for the destination. Liquid grades use food-grade drums or IBCs.

Do you offer private label or finished products?

No. We supply sweetener ingredients and blends. We do not quote finished beverages, confectionery, gummies, sachets or private-label production.

Quality

Quality questions

How is a lot released?

The lot is tested against the agreed specification, the COA is issued, and the document pack is completed before dispatch. A result outside the limit is rejected or reworked and re-tested; it is not averaged into a pass.

What contaminant panel is tested?

Lead, arsenic, cadmium and mercury by ICP-MS, plus the microbiology panel: aerobic plate count, yeast and mould, E. coli and Salmonella. The limits are agreed in the specification and stated on the COA.

Which certificates do you hold?

NSF 455-2 GMP, ISO 22000, HACCP, ISO 9001, HALAL, USDA Organic and EU Organic. Current copies are available with the quotation, and a product-specific statement is issued against the grade and the batch.

Do you keep a retained sample?

A retained sample is kept from each released lot so a later question can be checked against the same material. The retention period is agreed in the supplier qualification file and stated in the TDS.

When is third-party testing worth ordering?

On a first shipment from a new source, when the identity of the material is critical to the customer's specification, or when an outside report is requested. The useful panel answers the open question, not a full repeat of the certificate.

How do you handle a taste complaint?

We compare the retained sample with the production lot, review the matrix and the process, and test the specification. If the material is outside the agreed specification, the lot is replaced or credited under the terms of the order.

Still open

A question that is not on the list.

Send the specification, the certificate or the label. The answer comes from the people who prepare the batch file, and it will name the method or the regulation it relies on.

Other ways to look

Next step

Ask the question with the document.

A certificate, a specification or a label makes the answer specific. We reply with the method, the limit and the gap.