Gummies, sticks, capsules and powders

Supplements & Functional Food

A supplement sweetener has to fit the application: low use rate, clean taste, good flow and a carrier that matches the formula.

The brief

Supplements and functional foods put the sweetener into a gummy, a stick pack, a capsule or a chew, where the dose, the process and the texture are tightly constrained. A high-intensity sweetener can taste bitter against a mineral or an amino acid; a polyol can add cooling or bulk; a fibre can add body. This page covers the grade questions behind a supplement trial: dose, taste masking, process, hygroscopicity and the carrier.

GummiesPowder sticksCapsules and tabletsChewsFunctional powders

Matched ingredients

What changes in this format

Three constraints, one grade decision.

The same powder can pass one constraint and fail another. The trial should test all three.

Taste masking

A sweetener is often used to mask a mineral, an amino acid or a botanical. The taste interaction is product-specific; test the sweetener with the active, at the final dose, not in water alone.

Dose and application

A gummy needs bulk and a set; a stick pack needs solubility and flow; a capsule needs a small dose and no off-note. The grade follows the form, not the other way round.

Hygroscopicity and stability

A hygroscopic polyol can soften a gummy or cake a powder. Check the water activity, the pack and the storage, and include the sweetener in the stability protocol.

Ingredients for this application

Starting points, not a shortlist limit.

Every grade is quoted against the specification and the process, not against the application label.

SW-024 Core range

Erythritol

C₄H₁₀O₄ · CAS 149-32-6

99.0–100.5% (HPLC-RI)

Polyols 1 kg MOQ
View specification →
SW-025 Core range

Xylitol

C₅H₁₂O₅ · CAS 87-99-0

98.5–101.0% (HPLC-RI)

Polyols 1 kg MOQ
View specification →
SW-016 Core range

Sucralose

C₁₂H₁₉Cl₃O₈ · CAS 56038-13-2

98.0–102.0% (HPLC)

High-intensity 1 kg MOQ
View specification →
SW-001 Core range

Steviol Glycosides 95%

Steviol glycoside mixture (mainly stevioside and rebaudioside A) · CAS 57817-89-7 (stevioside)

≥95.0% (HPLC)

Plant-derived 1 kg MOQ
View specification →
SW-004 Core range

Monk Fruit Extract 50%

Mogroside V and related cucurbitane glycosides · CAS 88901-36-4 (Mogroside V)

≥50.0% (HPLC)

Plant-derived 1 kg MOQ
View specification →
SW-039 Core range

Inulin

(C₆H₁₀O₅)n · CAS 9005-80-5

≥90.0% (HPLC-RI)

Soluble fibres 1 kg MOQ
View specification →
SW-040 Core range

Fructooligosaccharides (FOS)

(C₆H₁₀O₅)n, n = 2–8 · CAS 308066-66-2

≥95.0% (HPLC-RI)

Soluble fibres 1 kg MOQ
View specification →
SW-045 Core range

Isomaltooligosaccharide (IMO) 90%

(C₆H₁₀O₅)n, α-1,6-linked · CAS —

≥90.0% (HPLC-RI)

Soluble fibres 1 kg MOQ
View specification →
SW-049 Core range

Partially Hydrolyzed Guar Gum (PHGG)

Partially hydrolysed guar galactomannan · CAS 9000-30-0 (guar gum basis)

≥85.0% (AOAC 2009.01)

Soluble fibres 1 kg MOQ
View specification →
SW-046 Specialty

Stachyose 98%

C₂₄H₄₂O₂₁ · CAS 470-55-3

≥98.0% (HPLC-RI)

Soluble fibres 1 kg MOQ
View specification →

Next step

Describe the finished product. We will name the grade.

The dose, the process step, the taste and the destination are enough to start a specification review.