Rare & Functional Sugars · Core range

Isomaltulose

C₁₂H₂₂O₁₁ · CAS 13718-94-0 · 6-O-α-D-glucopyranosyl-D-fructose, crystalline

A crystalline isomaltulose for slow-release carbohydrate and sugar replacement, with a sucrose-like taste, low hygroscopicity and a clear distinction from isomalt.

SW-037 Reviewed 20 November 2026 5 technical documents

Isomaltulose (dry basis)
≥98.0%
Minimum order
1 kg
Indicative sweetness
40–50% of sucrose
Indicative lead time
3–10 days

Specification

What the certificate will report

Isomaltulose (dry basis)≥98.0% (HPLC-RI)
AppearanceWhite crystalline powder
Moisture≤0.5%
pH (10% solution)4.5–7.0
SolubilitySoluble in water; low hygroscopicity
Particle size≥95% through 60 mesh
Bulk density0.55–0.85 g/mL
Other sugars≤1.0% (HPLC-RI)
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₁₂H₂₂O₁₁
CAS13718-94-0
Marker setIsomaltulose ≥98%
AppearanceWhite crystalline powder
SolubilitySoluble in water; low hygroscopicity and a clean solution.

Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness40–50% of sucrose, indicative
Taste noteClean, sucrose-like sweetness with no strong cooling; the body is closer to sugar than a high-intensity sweetener.
Starting use level5–30% in beverages, bakery and confectionery, depending on the sugar replacement
Blend behaviourBlends with high-intensity sweeteners and polyols; adds bulk and a sugar-like mouthfeel.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Medium
Finish Medium
Mouthfeel Low cooling
Off-note Clean; can brown

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level16.00–20.00%
Per kg / litre160.00–200.00 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Soluble in water

Heat

Stable in dry form

pH

Stable across normal food pH

Moisture

Low

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Confirm it is isomaltulose, not isomalt or isomaltitol.
  • Test browning and body in the real bake or beverage.
  • Taste at the target sucrose equivalence in the real matrix, not in water alone.
  • Confirm isomaltulose (dry basis): ≥98.0% (HPLC-RI). Check the method and reference standard on the COA.

Buyer questions

Practical answers

What is Isomaltulose specified to?

Isomaltulose (dry basis): ≥98.0% (HPLC-RI). The full specification adds Appearance, Moisture, pH (10% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which rare sugar and hydrate is this?

The catalog grade is 6-O-α-D-glucopyranosyl-D-fructose, crystalline. The hydrate or anomer and the other-sugar profile are part of the specification. The grade page compares the forms and states what changes in the specification and the process.

Which applications does this grade fit?

Beverages, Bakery, Confectionery, Sports nutrition, Dairy. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.