Polyols & Sugar Alcohols · Core range
Lactitol Monohydrate
C₁₂H₂₄O₁₁·H₂O · CAS 81025-04-9 · Lactitol monohydrate, crystalline powder
A lactitol monohydrate for sugar-free chocolate, bakery and confectionery, with a clean sweetness, low hygroscopicity and a sugar-like body.
SW-030 Reviewed 20 November 2026 5 technical documents
- Lactitol (dry basis)
- ≥98.0%
- Minimum order
- 1 kg
- Indicative sweetness
- 30–40% of sucrose
- Indicative lead time
- 3–10 days
Specification
What the certificate will report
| Lactitol (dry basis) | ≥98.0% (HPLC-RI) |
|---|---|
| Appearance | White crystalline powder |
| Moisture | ≤0.5% (monohydrate basis) |
| pH (10% solution) | 4.5–7.0 |
| Solubility | Soluble in water; low hygroscopicity |
| Particle size | ≥95% through 60 mesh |
| Bulk density | 0.55–0.85 g/mL |
| Other polyols | ≤1.0% (HPLC-RI) |
| Heavy metals | Pb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | C₁₂H₂₄O₁₁·H₂O |
| CAS | 81025-04-9 |
| Marker set | Lactitol ≥98%, monohydrate |
| Appearance | White crystalline powder |
| Solubility | Soluble in water; low hygroscopicity and a clean, mild sweetness. |
Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.
Sweetness and application
What the grade tastes like
| Indicative sweetness | 30–40% of sucrose, indicative |
|---|---|
| Taste note | Mild, clean sweetness with little cooling; useful where a sugar-like body is wanted without the sweetness of maltitol. |
| Starting use level | 5–30% in chocolate, bakery and confectionery, depending on the sugar replacement |
| Blend behaviour | Blends with high-intensity sweeteners and maltitol; adds bulk without a strong sweetness. |
Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →
Indicative profile curated from the published taste note. Confirm it in your matrix.
Sweetness calculator
Enter the target sucrose sweetness to estimate the use level.
Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.
Process fit
Soluble in water
Stable in dry form and through normal processing
Stable across normal food pH
Low
Ordering
Entry quantity, packing and sample
Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.
Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.
Technical documentation
Five documents, one standard.
Quality and procurement pages for Lactitol Monohydrate. Each card opens the full document; a sample COA and the technical data sheet are available on request.





What to confirm before ordering
- Confirm the monohydrate or anhydrous form and the moisture basis.
- Test the chocolate tempering and the bakery crumb.
- Lactitol is less sweet than sucrose; calculate the sweetness and the bulk separately.
- Confirm lactitol (dry basis): ≥98.0% (HPLC-RI). Check the method and reference standard on the COA.
Buyer questions
Practical answers
What is Lactitol Monohydrate specified to?
Lactitol (dry basis): ≥98.0% (HPLC-RI). The full specification adds Appearance, Moisture, pH (10% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which polyol and crystal form is this?
The catalog grade is Lactitol monohydrate, crystalline powder. Moisture, particle size and the other-polyol profile are release parameters, not packing details. The grade page explains the crystal forms and the applications each one fits.
Which applications does this grade fit?
Sugar-free chocolate, Bakery, Confectionery, Ice cream, Tabletop. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the purification system
- Specification comparison against the specification you sent
Next step
Send the spec. We will confirm the form.
A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.