Polyols & Sugar Alcohols · Core range

Xylitol

C₅H₁₂O₅ · CAS 87-99-0 · Xylitol, crystalline polyol

A 99% xylitol crystal with a sucrose-like sweetness and a strong cooling effect, for confectionery, oral care and tabletop.

SW-025 Reviewed 20 November 2026 5 technical documents

Assay (dried basis)
98.5–101.0%
Minimum order
1 kg
Indicative sweetness
90–100% of sucrose
Indicative lead time
1–7 days

Specification

What the certificate will report

Assay (dried basis)98.5–101.0% (HPLC-RI)
AppearanceWhite crystalline powder or granules
Moisture≤0.5%
pH (5% solution)5.0–7.0
SolubilityFreely soluble in water; endothermic dissolution
Particle size≥95% through 60 mesh; 80 mesh on request
Bulk density0.55–0.85 g/mL
Other polyols≤0.5% (HPLC)
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₅H₁₂O₅
CAS87-99-0
Marker setXylitol 98.5–101.0%, other polyols ≤0.5%
AppearanceWhite crystalline powder or granules
SolubilityFreely soluble in water; strongly endothermic, with a cooling effect that is more pronounced than erythritol's.

Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness90–100% of sucrose, indicative
Taste noteSweetness close to sucrose with a strong cooling effect and a clean finish; the cooling can dominate at high dose.
Starting use level2–10% in confectionery, oral care and tabletop, depending on the sweetness target
Blend behaviourBlends with erythritol and maltitol; it can improve the sweetness of a polyol system while adding cooling.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Fast
Finish Medium
Mouthfeel Strong cooling
Off-note Cooling; hygroscopic mouthfeel

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level8.00–8.89%
Per kg / litre80.00–88.89 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Freely soluble in water

Heat

Stable in dry form

pH

Stable across normal food pH

Moisture

Hygroscopic

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time1–7 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Confirm the particle size and the other-polyol profile.
  • Check the pack and storage humidity; xylitol picks up water.
  • Xylitol is hygroscopic; specify the packaging and storage conditions.
  • The cooling effect is strong; taste at the final dose.

Buyer questions

Practical answers

What is Xylitol specified to?

Assay (dried basis): 98.5–101.0% (HPLC-RI). The full specification adds Appearance, Moisture, pH (5% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which polyol and crystal form is this?

The catalog grade is Xylitol, crystalline polyol. Moisture, particle size and the other-polyol profile are release parameters, not packing details. The grade page explains the crystal forms and the applications each one fits.

Which applications does this grade fit?

Chewing gum, Confectionery, Tabletop, Oral care, Beverages. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.