Polyols & Sugar Alcohols · Core range
Isomalt
1,6-GPS and 1,1-GPM mixture · CAS 64519-82-0 · Isomalt, crystalline granules or powder
An isomalt for sugar-free hard candy and baked goods, specified by the GPS/GPM ratio, moisture and particle size for moulding and conching.
SW-028 Reviewed 20 November 2026 5 technical documents
- Isomalt content
- ≥98.0%
- Minimum order
- 1 kg
- Indicative sweetness
- 45–60% of sucrose
- Indicative lead time
- 1–7 days
Specification
What the certificate will report
| Isomalt content | ≥98.0% (HPLC-RI) |
|---|---|
| 1,6-GPS : 1,1-GPM | 43–57 : 43–57 (HPLC) |
| Appearance | White crystalline granules or powder |
| Moisture | ≤0.5% |
| pH (10% solution) | 4.5–7.0 |
| Solubility | Soluble in water; low hygroscopicity |
| Particle size | ≥95% through 40 mesh; powder on request |
| Bulk density | 0.60–0.90 g/mL |
| Heavy metals | Pb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | 1,6-GPS and 1,1-GPM mixture |
| CAS | 64519-82-0 |
| Marker set | Isomalt ≥98%, GPS/GPM ratio 43–57 : 43–57 |
| Appearance | White crystalline granules or powder |
| Solubility | Soluble in water; low hygroscopicity makes it useful in hard candy and dusty environments. |
Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.
Sweetness and application
What the grade tastes like
| Indicative sweetness | 45–60% of sucrose, indicative |
|---|---|
| Taste note | Mild sweetness with little cooling and a clean finish; the sweetness is lower than maltitol or xylitol. |
| Starting use level | 10–50% in sugar-free hard candy, depending on the recipe |
| Blend behaviour | Blends with high-intensity sweeteners to reach the target sweetness; it provides the bulk and the glass structure. |
Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →
Indicative profile curated from the published taste note. Confirm it in your matrix.
Sweetness calculator
Enter the target sucrose sweetness to estimate the use level.
Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.
Process fit
Soluble in water
Stable at hard-candy temperatures
Stable across normal food pH
Low
Ordering
Entry quantity, packing and sample
Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.
Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.
Technical documentation
Five documents, one standard.
Quality and procurement pages for Isomalt. Each card opens the full document; a sample COA and the technical data sheet are available on request.





What to confirm before ordering
- Ask for the GPS:GPM ratio, not only the isomalt content.
- Check particle size for hard-candy cooking and moulding.
- Isomalt is low-hygroscopic; store sealed but it is more forgiving than sorbitol.
- Confirm isomalt content: ≥98.0% (HPLC-RI). Check the method and reference standard on the COA.
Buyer questions
Practical answers
What is Isomalt specified to?
Isomalt content: ≥98.0% (HPLC-RI). The full specification adds 1,6-GPS : 1,1-GPM, Appearance, Moisture, pH (10% solution), Solubility and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which polyol and crystal form is this?
The catalog grade is Isomalt, crystalline granules or powder. Moisture, particle size and the other-polyol profile are release parameters, not packing details. The grade page explains the crystal forms and the applications each one fits.
Which applications does this grade fit?
Sugar-free hard candy, Tabletop, Bakery, Chocolate, Chewing gum. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the purification system
- Specification comparison against the specification you sent
Next step
Send the spec. We will confirm the form.
A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.