High-Intensity Sweeteners · Specialty

Neotame

C₂₀H₃₀N₂O₅ · CAS 165450-17-9 · N-[N-(3,3-dimethylbutyl)-L-α-aspartyl]-L-phenylalanine 1-methyl ester

A high-intensity neotame powder for very low-use-rate sweetening, specified by assay, related substances and the carrier or form needed for accurate dosing.

SW-020 Reviewed 20 November 2026 5 technical documents

Assay (dried basis)
97.0–102.0%
Minimum order
1 kg
Indicative sweetness
7,000–13,000 × sucrose
Indicative lead time
3–10 days

Specification

What the certificate will report

Assay (dried basis)97.0–102.0% (HPLC)
Related substances≤2.0% (HPLC)
AppearanceWhite to off-white powder
Moisture≤5.0%
pH (0.5% solution)5.0–7.0
SolubilitySparingly soluble in water
Particle size≥95% through 100 mesh
Bulk density0.30–0.60 g/mL
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₂₀H₃₀N₂O₅
CAS165450-17-9
Marker setNeotame 97.0–102.0%
AppearanceWhite to off-white powder
SolubilitySparingly soluble in water; a pre-diluted premix is usually needed at food use levels.

Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness7,000–13,000 × sucrose, indicative
Taste noteClean sweetness with a slower onset and a slight linger; at very low use levels the aftertaste is less pronounced than saccharin.
Starting use level0.0002–0.005% in food, depending on the category
Blend behaviourUsed at trace levels with other sweeteners; a micro-dose premix improves weighing accuracy.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Medium
Finish Long
Mouthfeel Neutral
Off-note Slight linger at high dose

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level0.00062–0.0011%
Per kg / litre0.0062–0.011 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Sparingly soluble in water

Heat

Stable in dry form

pH

Most stable at mildly acidic pH

Moisture

Moderate

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Ask for the related-substance profile and the carrier if a premix.
  • Check the micro-dose weighing step; homogeneity dominates at trace use.
  • Neotame is used at parts-per-million levels; a premix is usually necessary for accuracy.
  • Taste at the final dose; the linger is subtle but can build in a blend.

Buyer questions

Practical answers

What is Neotame specified to?

Assay (dried basis): 97.0–102.0% (HPLC). The full specification adds Related substances, Appearance, Moisture, pH (0.5% solution), Solubility and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which exact high-intensity sweetener is this?

The catalog grade is N-[N-(3,3-dimethylbutyl)-L-α-aspartyl]-L-phenylalanine 1-methyl ester. The salt, the physical form and the related-substance profile are part of the specification; the grade page compares the alternatives and explains what changes in the specification and the process.

Which applications does this grade fit?

Beverages, Confectionery, Tabletop, Dairy, Chewing gum. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.