High-Intensity Sweeteners · Core range

Aspartame

C₁₄H₁₈N₂O₅ · CAS 22839-47-0 · L-aspartyl-L-phenylalanine methyl ester, crystalline powder

A 99% aspartame powder with a sucrose-like sweetness, specified by assay, related substances and phenylalanine content, for beverages and tabletop where the application fits.

SW-018 Reviewed 20 November 2026 5 technical documents

Assay (dried basis)
98.0–102.0%
Minimum order
1 kg
Indicative sweetness
180–220 × sucrose
Indicative lead time
1–7 days

Specification

What the certificate will report

Assay (dried basis)98.0–102.0% (HPLC)
L-Phenylalanine47.0–52.0% (HPLC)
Related substances≤2.0% (HPLC)
AppearanceWhite crystalline powder
Moisture≤4.5%
pH (1% solution)4.5–6.0
SolubilitySparingly soluble in water; more soluble at lower pH
Particle size≥95% through 80 mesh
Bulk density0.30–0.60 g/mL
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₁₄H₁₈N₂O₅
CAS22839-47-0
Marker setAspartame 98.0–102.0%, phenylalanine 47–52%
AppearanceWhite crystalline powder
SolubilitySparingly soluble in water; solubility increases at lower pH, and dissolution time matters in a beverage line.

Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness180–220 × sucrose, indicative
Taste noteClean, sucrose-like sweetness with a slower onset than Ace-K and a shorter tail than saccharin.
Starting use level0.01–0.06% in beverages, depending on the target sucrose equivalence
Blend behaviourStrongly synergistic with Ace-K; the blend is common in beverages and tabletop.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Medium
Finish Short
Mouthfeel Neutral
Off-note Clean at use level

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level0.036–0.044%
Per kg / litre0.36–0.44 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Sparingly soluble in water

Heat

Not suited to high-heat, long-hold processes

pH

Most stable at pH 3–5

Moisture

Moderate

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time1–7 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Ask for the diketopiperazine figure on stored lots.
  • Check the phenylalanine content and the heat step in the process.
  • Aspartame is heat-labile; add after high-heat steps where possible.
  • Compare blends at equal sucrose equivalence, not equal weight.

Buyer questions

Practical answers

What is Aspartame specified to?

Assay (dried basis): 98.0–102.0% (HPLC). The full specification adds L-Phenylalanine, Related substances, Appearance, Moisture, pH (1% solution) and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which exact high-intensity sweetener is this?

The catalog grade is L-aspartyl-L-phenylalanine methyl ester, crystalline powder. The salt, the physical form and the related-substance profile are part of the specification; the grade page compares the alternatives and explains what changes in the specification and the process.

Which applications does this grade fit?

Beverages, Tabletop, Dairy, Confectionery, Chewing gum. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.