High-Intensity Sweeteners · Core range
Acesulfame Potassium
C₄H₄KNO₄S · CAS 55589-62-3 · Acesulfame potassium salt, crystalline powder
A 99% acesulfame potassium powder for beverage and tabletop blends, specified by assay, potassium content and particle size for the line.
SW-017 Reviewed 20 November 2026 5 technical documents
- Assay (dried basis)
- 99.0–101.0%
- Minimum order
- 1 kg
- Indicative sweetness
- 180–200 × sucrose
- Indicative lead time
- 1–7 days
Specification
What the certificate will report
| Assay (dried basis) | 99.0–101.0% (HPLC) |
|---|---|
| Potassium (K) | 17.0–19.0% (titration) |
| Appearance | White crystalline powder |
| Moisture | ≤1.0% |
| pH (1% solution) | 5.5–7.5 |
| Solubility | Freely soluble in water |
| Particle size | ≥95% through 80 mesh |
| Bulk density | 0.60–0.90 g/mL |
| Heavy metals | Pb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | C₄H₄KNO₄S |
| CAS | 55589-62-3 |
| Marker set | Ace-K 99.0–101.0%, potassium 17.0–19.0% |
| Appearance | White crystalline powder |
| Solubility | Freely soluble in water; solutions are neutral to slightly alkaline. |
Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.
Sweetness and application
What the grade tastes like
| Indicative sweetness | 180–200 × sucrose, indicative |
|---|---|
| Taste note | Fast onset with a bitter, metallic linger at higher doses; rarely used alone in a clean-finish beverage. |
| Starting use level | 0.005–0.05% in beverages, depending on the blend |
| Blend behaviour | Highly synergistic with aspartame and sucralose; the blend reduces the total sweetener dose and softens the linger. |
Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →
Indicative profile curated from the published taste note. Confirm it in your matrix.
Sweetness calculator
Enter the target sucrose sweetness to estimate the use level.
Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.
Process fit
Freely soluble in water
Stable in dry form and through normal pasteurisation
Stable across pH 3–7
Low to moderate
Ordering
Entry quantity, packing and sample
Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.
Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.
Technical documentation
Five documents, one standard.
Quality and procurement pages for Acesulfame Potassium. Each card opens the full document; a sample COA and the technical data sheet are available on request.





What to confirm before ordering
- Confirm the potassium figure and the assay basis.
- Taste at the target dose; the metallic linger is blend-dependent.
- Ace-K is usually blended; compare the blend at equal sucrose equivalence, not at equal weight.
- Confirm assay (dried basis): 99.0–101.0% (HPLC). Check the method and reference standard on the COA.
Buyer questions
Practical answers
What is Acesulfame Potassium specified to?
Assay (dried basis): 99.0–101.0% (HPLC). The full specification adds Potassium (K), Appearance, Moisture, pH (1% solution), Solubility and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which exact high-intensity sweetener is this?
The catalog grade is Acesulfame potassium salt, crystalline powder. The salt, the physical form and the related-substance profile are part of the specification; the grade page compares the alternatives and explains what changes in the specification and the process.
Which applications does this grade fit?
Beverages, Tabletop, Confectionery, Bakery, Dairy. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the purification system
- Specification comparison against the specification you sent
Next step
Send the spec. We will confirm the form.
A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.