Plant-Derived Sweeteners & Sweet Proteins · Specialty
Rebaudioside M 95%
C₅₆H₉₀O₃₃ · CAS 1220616-44-3 · Rebaudioside M, high-purity steviol glycoside
A 95% Rebaudioside M grade for premium beverages that need a faster, cleaner sweetness than Reb A, with the minor glycoside profile stated on the COA.
SW-003 Reviewed 20 November 2026 5 technical documents
- Rebaudioside M
- ≥95.0%
- Minimum order
- 1 kg
- Indicative sweetness
- 250–350 × sucrose
- Indicative lead time
- 3–10 days
Specification
What the certificate will report
| Rebaudioside M | ≥95.0% (HPLC) |
|---|---|
| Total steviol glycosides | ≥98.0% (HPLC) |
| Rebaudioside A | ≤2.0% (HPLC) |
| Stevioside | ≤0.5% (HPLC) |
| Appearance | White to off-white powder |
| Moisture | ≤3.0% |
| pH (1% solution) | 4.5–7.0 |
| Solubility | Freely soluble in water |
| Particle size | ≥95% through 80 mesh |
| Bulk density | 0.30–0.60 g/mL |
| Heavy metals | Pb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | C₅₆H₉₀O₃₃ |
| CAS | 1220616-44-3 |
| Marker set | Reb M ≥95%, total steviol glycosides ≥98%, Reb A ≤2% |
| Appearance | White to off-white, free-flowing powder |
| Solubility | Freely soluble in water; clear solution at typical beverage use levels. |
Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.
Sweetness and application
What the grade tastes like
| Indicative sweetness | 250–350 × sucrose, indicative |
|---|---|
| Taste note | Faster onset and cleaner finish than Reb A, with less liquorice linger; still sweet after the swallow at high dose. |
| Starting use level | 0.008–0.05% in beverages, depending on the target sucrose equivalence |
| Blend behaviour | Works with erythritol and allulose; a small monk fruit fraction can add roundness. |
Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →
Indicative profile curated from the published taste note. Confirm it in your matrix.
Sweetness calculator
Enter the target sucrose sweetness to estimate the use level.
Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.
Process fit
Freely soluble in water
Stable dry and through standard beverage pasteurisation
Stable across normal beverage pH
Moderately hygroscopic
Ordering
Entry quantity, packing and sample
Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.
Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.
Technical documentation
Five documents, one standard.
Quality and procurement pages for Rebaudioside M 95%. Each card opens the full document; a sample COA and the technical data sheet are available on request.





What to confirm before ordering
- Confirm whether the grade is leaf-extracted or fermentation-derived; the impurity profile differs.
- Taste at the final pH; the clean finish can change in acid.
- Reb M costs more per kilogram than Reb A; compare at sucrose equivalence, not at equal weight.
- Confirm rebaudioside m: ≥95.0% (HPLC). Check the method and reference standard on the COA.
Buyer questions
Practical answers
What is Rebaudioside M 95% specified to?
Rebaudioside M: ≥95.0% (HPLC). The full specification adds Total steviol glycosides, Rebaudioside A, Stevioside, Appearance, Moisture and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which glycoside or extract marker is this?
The catalog grade is Rebaudioside M, high-purity steviol glycoside. The specification is built around Reb M ≥95%, total steviol glycosides ≥98%, Reb A ≤2%, so a total percentage is not accepted as a substitute for the profile. The grade page explains what changes between the published alternatives.
Which applications does this grade fit?
Premium beverages, Tabletop, Dairy alternatives, Functional drinks, Supplements. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the purification system
- Specification comparison against the specification you sent
Next step
Send the spec. We will confirm the form.
A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.