02.1 Grade decision

Glycyrrhizin vs monoammonium glycyrrhizinate: the salt decides the solution

Technical document 02.1 · Reviewed 2026-11-20 · Glycyrrhizin 98%

On this page
  1. The two options
  2. Taste and sweetness
  3. Solubility and process
  4. Grade and use level
  5. The decision
  6. A three-day trial plan
  7. How this document is controlled

Same active, different solubility is a formulation question, not a catalogue question. The two options are different specifications, not two names for the same drum. This page compares the two options in the terms that decide a bench trial: identity, taste, solubility, process and the cost per unit of sweetness.

In one line

The two options are different specifications, not two names for the same drum.

The two options

Glycyrrhizin vs monoammonium glycyrrhizinate: the salt decides the solution
OptionWhat it is
Option AGlycyrrhizin (free acid): higher active per kilogram, sparingly soluble, needs alkaline conditions or a co-solvent.
Option BMonoammonium glycyrrhizinate: more water-soluble, easier in a clear beverage, but a different salt name and a different molecular weight.

Taste and sweetness

The published sweetness for Glycyrrhizin 98% is 50–100 × sucrose, indicative; slow onset and a long liquorice linger. That figure is an average, and the difference between the two options is usually in the shape of the curve rather than the peak intensity. Liquorice sweetness with a slow onset and a very long tail; at high dose the anise note dominates.

Run the comparison at equal sucrose equivalence. If one option is dosed by weight and the other by active content, convert both to the same delivered sweetness before the panel tastes them. A difference in the use level is not a difference in taste unless the delivery is matched.

Solubility and process

Glycyrrhizin (free acid): higher active per kilogram, sparingly soluble, needs alkaline conditions or a co-solvent. Monoammonium glycyrrhizinate: more water-soluble, easier in a clear beverage, but a different salt name and a different molecular weight. The practical questions are whether the material dissolves or disperses at the target use level, whether it survives the heat step, and whether it changes the viscosity or the clarity of the finished product.

For this product, Sparingly soluble in water; solubility rises with pH, which is why the salt form is often easier to formulate. Stable in dry form; in acidic solution, hydrolysis to glycyrrhetinic acid should be checked over shelf life. A bench trial that ignores the process step can pick the wrong option with a clean conscience.

Grade and use level

The published grades are Glycyrrhizin 98%, Monoammonium glycyrrhizinate, Dipotassium glycyrrhizinate, Licorice extract 65%. The primary specification is ≥98.0% (HPLC). The use level is application-specific: start from the target sucrose equivalence, then adjust for the matrix, the process and the other sweeteners in the formula.

For this grade, Sparingly soluble in water; solubility rises with pH, which is why the salt form is often easier to formulate. 0.002–0.02% in food, depending on the category and the desired liquorice note is the current starting window; confirm it in a bench trial rather than scaling directly from the catalogue.

The decision

Choose the free acid for a dry blend or an alkaline system where the active load matters.

The recommendation is a starting point, not a rule. The final choice belongs to the formula, the process and the market, and it should be recorded with the trial result and the lot numbers so it can be repeated.

A three-day trial plan

  1. Day one: prepare stock solutions or pre-blends of both options at equal sucrose equivalence.
  2. Day two: taste in the real matrix at the real pH, with the real process, and record the onset, peak, tail and any off-note.
  3. Day three: repeat the tasting after the heat step or 24 hours of hold, and compare the physical result: clarity, colour, viscosity or crystallisation.

Keep the two stock solutions labelled with the lot and the use level. A trial without the lot number is an anecdote, and an anecdote is expensive to scale.

Read the related pages for this grade: Glycyrrhizin 98% specification and grades, COA and batch testing and identity and adulteration.

How this document is controlled

This page is part of the technical file for Glycyrrhizin 98%. It is reviewed when the specification, the analytical method or the packing changes. The date at the top of the page is the review date; the current specification should be checked before a launch.

The commercial document is the specification agreed with the buyer, the batch COA for the lot and the technical data sheet supplied with that lot. If this page and the agreed specification disagree, the agreed specification governs the order. The page exists to explain the reasoning behind the specification, so a quality, procurement or technical reviewer can see why each line is there.

The product hub for this grade is Glycyrrhizin 98%: specification, grades and documents. The release workflow is described on the quality and documentation page, and the analytical method behind the primary assay is listed in the method library.

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.