Plant-Derived Sweeteners & Sweet Proteins · Specialty

Glycyrrhizin 98%

C₄₂H₆₂O₁₆ · CAS 1405-86-3 · Glycyrrhizic acid, purified from licorice root

A 98% glycyrrhizic acid powder for flavour and sweetness modification, with the salt form, use level and taste profile stated before the sample ships.

SW-005 Reviewed 20 November 2026 5 technical documents

Glycyrrhizic acid
≥98.0%
Minimum order
1 kg
Indicative sweetness
50–100 × sucrose
Indicative lead time
3–10 days

Specification

What the certificate will report

Glycyrrhizic acid≥98.0% (HPLC)
AppearanceWhite to light yellow powder
Moisture≤6.0%
pH (1% solution)4.5–6.5
SolubilitySparingly soluble in water; soluble in alkaline solution
Particle size≥95% through 80 mesh
Bulk density0.35–0.65 g/mL
Ash≤1.0%
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₄₂H₆₂O₁₆
CAS1405-86-3
Marker setGlycyrrhizic acid ≥98%
AppearanceWhite to light yellow, free-flowing powder
SolubilitySparingly soluble in water; solubility rises with pH, which is why the salt form is often easier to formulate.

Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness50–100 × sucrose, indicative; slow onset and a long liquorice linger
Taste noteLiquorice sweetness with a slow onset and a very long tail; at high dose the anise note dominates.
Starting use level0.002–0.02% in food, depending on the category and the desired liquorice note
Blend behaviourUsed at low levels to modify the tail of other sweeteners and to add a liquorice character; not a general bulk sweetener.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Slow
Finish Long
Mouthfeel Neutral
Off-note Liquorice dominates above use level

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level0.080–0.16%
Per kg / litre0.80–1.60 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Sparingly soluble in water

Heat

Stable in dry form

pH

More soluble and stable at neutral to mildly alkaline pH

Moisture

Moderately hygroscopic

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Confirm the salt form and the assay basis; the free acid and salts behave differently.
  • Taste at the final dose; the liquorice note becomes dominant above the use window.
  • Check the destination-market warning requirements for glycyrrhizin intake.
  • For a clear beverage, test the salt form's solubility at the final pH.

Buyer questions

Practical answers

What is Glycyrrhizin 98% specified to?

Glycyrrhizic acid: ≥98.0% (HPLC). The full specification adds Appearance, Moisture, pH (1% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which glycoside or extract marker is this?

The catalog grade is Glycyrrhizic acid, purified from licorice root. The specification is built around Glycyrrhizic acid ≥98%, so a total percentage is not accepted as a substitute for the profile. The grade page explains what changes between the published alternatives.

Which applications does this grade fit?

Flavour systems, Confectionery, Sauces, Beverages, Oral care. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.