Neotame vs aspartame: potency is not the only difference
A trace-use sweetener needs a different plan is a formulation question, not a catalogue question. Neotame is roughly 30–60 times sweeter than aspartame, so the dose is measured in parts per million and the premix becomes part of the specification. This page compares the two options in the terms that decide a bench trial: identity, taste, solubility, process and the cost per unit of sweetness.
Neotame is roughly 30–60 times sweeter than aspartame, so the dose is measured in parts per million and the premix becomes part of the specification.
The two options
| Option | What it is |
|---|---|
| Option A | Neotame 99% powder: the standard catalog grade. |
| Option B | Neotame 1% premix: the alternative grade for a different process. |
Taste and sweetness
The published sweetness for Neotame is 7,000–13,000 × sucrose, indicative. That figure is an average, and the difference between the two options is usually in the shape of the curve rather than the peak intensity. Clean sweetness with a slower onset and a slight linger; at very low use levels the aftertaste is less pronounced than saccharin.
Run the comparison at equal sucrose equivalence. If one option is dosed by weight and the other by active content, convert both to the same delivered sweetness before the panel tastes them. A difference in the use level is not a difference in taste unless the delivery is matched.
Solubility and process
Neotame 99% powder: the standard catalog grade. Neotame 1% premix: the alternative grade for a different process. The practical questions are whether the material dissolves or disperses at the target use level, whether it survives the heat step, and whether it changes the viscosity or the clarity of the finished product.
For this product, Sparingly soluble in water; a pre-diluted premix is usually needed at food use levels. Stable in dry form; heat and moisture can hydrolyse the ester over time. A bench trial that ignores the process step can pick the wrong option with a clean conscience.
Grade and use level
The published grades are Neotame 99% powder, Neotame 1% premix, Neotame granular, Neotame blend. The primary specification is 97.0–102.0% (HPLC). The use level is application-specific: start from the target sucrose equivalence, then adjust for the matrix, the process and the other sweeteners in the formula.
For this grade, Sparingly soluble in water; a pre-diluted premix is usually needed at food use levels. 0.0002–0.005% in food, depending on the category is the current starting window; confirm it in a bench trial rather than scaling directly from the catalogue.
The decision
Choose neotame when the use rate or the cost per sweetness unit is the driver and the line can handle a micro-dose premix.
The recommendation is a starting point, not a rule. The final choice belongs to the formula, the process and the market, and it should be recorded with the trial result and the lot numbers so it can be repeated.
A three-day trial plan
- Day one: prepare stock solutions or pre-blends of both options at equal sucrose equivalence.
- Day two: taste in the real matrix at the real pH, with the real process, and record the onset, peak, tail and any off-note.
- Day three: repeat the tasting after the heat step or 24 hours of hold, and compare the physical result: clarity, colour, viscosity or crystallisation.
Keep the two stock solutions labelled with the lot and the use level. A trial without the lot number is an anecdote, and an anecdote is expensive to scale.
Read the related pages for this grade: Neotame specification and grades, COA and batch testing and identity and adulteration.
How this document is controlled
This page is part of the technical file for Neotame. It is reviewed when the specification, the analytical method or the packing changes. The date at the top of the page is the review date; the current specification should be checked before a launch.
The commercial document is the specification agreed with the buyer, the batch COA for the lot and the technical data sheet supplied with that lot. If this page and the agreed specification disagree, the agreed specification governs the order. The page exists to explain the reasoning behind the specification, so a quality, procurement or technical reviewer can see why each line is there.
The product hub for this grade is Neotame: specification, grades and documents. The release workflow is described on the quality and documentation page, and the analytical method behind the primary assay is listed in the method library.
Related documents
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.