02.1 Grade decision

Resistant dextrin and the fibre method: why two numbers disagree

Technical document 02.1 · Reviewed 2026-11-20 · Resistant Dextrin

On this page
  1. The two options
  2. Taste and sweetness
  3. Solubility and process
  4. Grade and use level
  5. The decision
  6. A three-day trial plan
  7. How this document is controlled

The method is part of the specification is a formulation question, not a catalogue question. AOAC 2009.01 and AOAC 2011.25 can return different fibre figures for the same resistant dextrin. This page compares the two options in the terms that decide a bench trial: identity, taste, solubility, process and the cost per unit of sweetness.

In one line

AOAC 2009.01 and AOAC 2011.25 can return different fibre figures for the same resistant dextrin.

The two options

Resistant dextrin and the fibre method: why two numbers disagree
OptionWhat it is
Option AAOAC 2009.01: the enzymatic-gravimetric method used for many resistant dextrins; the figure is method-specific.
Option BAOAC 2011.25: a different enzymatic-LC method that can include or exclude different fractions.

Taste and sweetness

The published sweetness for Resistant Dextrin is 10% of sucrose, indicative. That figure is an average, and the difference between the two options is usually in the shape of the curve rather than the peak intensity. Clean, almost neutral with a very mild sweetness; useful where the fibre should not change the flavour.

Run the comparison at equal sucrose equivalence. If one option is dosed by weight and the other by active content, convert both to the same delivered sweetness before the panel tastes them. A difference in the use level is not a difference in taste unless the delivery is matched.

Solubility and process

AOAC 2009.01: the enzymatic-gravimetric method used for many resistant dextrins; the figure is method-specific. AOAC 2011.25: a different enzymatic-LC method that can include or exclude different fractions. The practical questions are whether the material dissolves or disperses at the target use level, whether it survives the heat step, and whether it changes the viscosity or the clarity of the finished product.

For this product, Freely soluble in water; low viscosity, clean solution. Stable in dry form and through normal beverage processing. A bench trial that ignores the process step can pick the wrong option with a clean conscience.

Grade and use level

The published grades are Resistant dextrin powder, Resistant dextrin syrup 70%, Resistant dextrin fine powder, Organic resistant dextrin. The primary specification is ≥85.0% (AOAC 2009.01). The use level is application-specific: start from the target sucrose equivalence, then adjust for the matrix, the process and the other sweeteners in the formula.

For this grade, Freely soluble in water; low viscosity, clean solution. 2–10% in beverages and supplements, depending on the fibre target is the current starting window; confirm it in a bench trial rather than scaling directly from the catalogue.

The decision

Do not compare an 85% figure from one method with a 90% figure from another as if they were the same measurement.

The recommendation is a starting point, not a rule. The final choice belongs to the formula, the process and the market, and it should be recorded with the trial result and the lot numbers so it can be repeated.

A three-day trial plan

  1. Day one: prepare stock solutions or pre-blends of both options at equal sucrose equivalence.
  2. Day two: taste in the real matrix at the real pH, with the real process, and record the onset, peak, tail and any off-note.
  3. Day three: repeat the tasting after the heat step or 24 hours of hold, and compare the physical result: clarity, colour, viscosity or crystallisation.

Keep the two stock solutions labelled with the lot and the use level. A trial without the lot number is an anecdote, and an anecdote is expensive to scale.

Read the related pages for this grade: Resistant Dextrin specification and grades, COA and batch testing and identity and adulteration.

How this document is controlled

This page is part of the technical file for Resistant Dextrin. It is reviewed when the specification, the analytical method or the packing changes. The date at the top of the page is the review date; the current specification should be checked before a launch.

The commercial document is the specification agreed with the buyer, the batch COA for the lot and the technical data sheet supplied with that lot. If this page and the agreed specification disagree, the agreed specification governs the order. The page exists to explain the reasoning behind the specification, so a quality, procurement or technical reviewer can see why each line is there.

The product hub for this grade is Resistant Dextrin: specification, grades and documents. The release workflow is described on the quality and documentation page, and the analytical method behind the primary assay is listed in the method library.

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.