IMO powder vs syrup: the water and the fibre dose
Two forms, two solids figures is a formulation question, not a catalogue question. A 75% IMO syrup contributes water and a different fibre dose per kilogram than the powder; the batch sheet must use the form supplied. This page compares the two options in the terms that decide a bench trial: identity, taste, solubility, process and the cost per unit of sweetness.
A 75% IMO syrup contributes water and a different fibre dose per kilogram than the powder; the batch sheet must use the form supplied.
The two options
| Option | What it is |
|---|---|
| Option A | Powder: 90% IMO, easy to weigh, hygroscopic, good for dry blends and supplements. |
| Option B | Syrup: easier to pump and disperse, lower solids, water activity and preservation implications. |
Taste and sweetness
The published sweetness for Isomaltooligosaccharide (IMO) 90% is 40–60% of sucrose, indicative. That figure is an average, and the difference between the two options is usually in the shape of the curve rather than the peak intensity. Mild, clean sweetness with a slight body; less sweet than sucrose.
Run the comparison at equal sucrose equivalence. If one option is dosed by weight and the other by active content, convert both to the same delivered sweetness before the panel tastes them. A difference in the use level is not a difference in taste unless the delivery is matched.
Solubility and process
Powder: 90% IMO, easy to weigh, hygroscopic, good for dry blends and supplements. Syrup: easier to pump and disperse, lower solids, water activity and preservation implications. The practical questions are whether the material dissolves or disperses at the target use level, whether it survives the heat step, and whether it changes the viscosity or the clarity of the finished product.
For this product, Freely soluble in water; low viscosity at use levels. Stable in dry form; hydrolysis should be checked at low pH and high heat. A bench trial that ignores the process step can pick the wrong option with a clean conscience.
Grade and use level
The published grades are IMO 90% powder, IMO 90% syrup, IMO 50% syrup. The primary specification is ≥90.0% (HPLC-RI). The use level is application-specific: start from the target sucrose equivalence, then adjust for the matrix, the process and the other sweeteners in the formula.
For this grade, Freely soluble in water; low viscosity at use levels. 3–10% in beverages and foods, depending on the fibre target is the current starting window; confirm it in a bench trial rather than scaling directly from the catalogue.
The decision
Use powder for a dry blend or a capsule. Use the syrup in a liquid line where the water is already in the batch sheet, and recalculate the fibre dose on a solids basis.
The recommendation is a starting point, not a rule. The final choice belongs to the formula, the process and the market, and it should be recorded with the trial result and the lot numbers so it can be repeated.
A three-day trial plan
- Day one: prepare stock solutions or pre-blends of both options at equal sucrose equivalence.
- Day two: taste in the real matrix at the real pH, with the real process, and record the onset, peak, tail and any off-note.
- Day three: repeat the tasting after the heat step or 24 hours of hold, and compare the physical result: clarity, colour, viscosity or crystallisation.
Keep the two stock solutions labelled with the lot and the use level. A trial without the lot number is an anecdote, and an anecdote is expensive to scale.
Read the related pages for this grade: Isomaltooligosaccharide (IMO) 90% specification and grades, COA and batch testing and identity and adulteration.
How this document is controlled
This page is part of the technical file for Isomaltooligosaccharide (IMO) 90%. It is reviewed when the specification, the analytical method or the packing changes. The date at the top of the page is the review date; the current specification should be checked before a launch.
The commercial document is the specification agreed with the buyer, the batch COA for the lot and the technical data sheet supplied with that lot. If this page and the agreed specification disagree, the agreed specification governs the order. The page exists to explain the reasoning behind the specification, so a quality, procurement or technical reviewer can see why each line is there.
The product hub for this grade is Isomaltooligosaccharide (IMO) 90%: specification, grades and documents. The release workflow is described on the quality and documentation page, and the analytical method behind the primary assay is listed in the method library.
Related documents
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.