Steviol Glycosides 95% stability: bulk, matrix and packaging
Steviol Glycosides 95% is stable enough to ship and store under normal conditions when it is packed correctly. The interesting failures happen at the edges: moisture, heat, low pH, a reactive matrix or a pack that lets water in. This page separates the bulk powder from the finished formula, because they fail for different reasons.
The powder is not the fragile part. The pack, the water activity, the process temperature and the matrix decide the shelf life.
Bulk stability
Moderately hygroscopic; store sealed below 25 °C and 60% RH. The specification limits moisture to ≤5.0%. Store the sealed pack below 25 °C, away from direct sunlight, strong odours and oxidising materials. A opened pack should be resealed or used within the agreed period; a liner left open in a humid room is the most common cause of caking.
The active is a glycoside, a mogroside or a protein, so the assay has to name the exact molecule or molecule family and the chromatographic method that separates it from its neighbours. The bulk powder is tested against the release specification at the time of manufacture. That result is a starting point, not a shelf-life promise. If the project needs a defined shelf life, ask for stability data on the grade and the pack, or run a study on the retained sample.
Stability in the finished matrix
Stable in dry blends; pasteurisation causes little loss, but taste drift and hydrolysis should be measured at the target pH and hold time. Typically stable from pH 3 to 7. Very low pH plus prolonged heat increases hydrolysis of the glycoside ester linkages.
Taste can move before the assay does. A sweetener can pass its assay after six months and still taste different because a minor component has hydrolysed, a carrier has picked up water, or the matrix has changed. For that reason a stability protocol should include a sensory check, not only a chemical result.
What the process does
Steviol Glycosides 95% is added at 0.01–0.08% in ready-to-drink beverages, depending on target sucrose equivalence. Add it at the point in the process where the temperature and the water activity are lowest, unless the formula requires it earlier for dispersion. In a beverage, make a pre-mix or a stock solution to avoid dust and local over-concentration. In a dry blend, pre-blend with a small portion of the bulk carrier before scaling.
Freely soluble in water; solutions are clear at typical use levels and remain stable across beverage pH. In a clear beverage, check the solution after the heat step and after 24 hours; a haze that appears later is often a solubility or a protein interaction problem rather than a loss of sweetness.
Packaging and shelf life
1 kg foil pouch and 25 kg fiber drum are the standard packs. The food-grade liner is part of the packaging specification, not an accessory. A drum that has been opened and resealed in a humid room can pick up enough water to change the flow and the weight of the scoop, even if the assay is unchanged.
Set the shelf life from the stability data for the grade and the pack. A common default is 24 months for a sealed, dry powder stored below 25 °C, but the figure should be confirmed for the specific product and pack rather than assumed from a catalogue.
A practical stability protocol
- Store three lots at 25 °C/60% RH and at 40 °C/75% RH for the planned shelf life.
- Test assay, moisture, appearance, particle size and microbiology at 0, 3, 6, 12 and 24 months.
- Add a sensory check at each point, using the same matrix and the same panel.
- Test the finished product as well as the bulk powder, because the matrix can be harsher than the pack.
- Keep the retained sample sealed and record the lot, the pack and the storage condition.
Read the related pages for this grade: Steviol Glycosides 95% specification and grades, COA and batch testing and identity and adulteration.
How this document is controlled
This page is part of the technical file for Steviol Glycosides 95%. It is reviewed when the specification, the analytical method or the packing changes. The date at the top of the page is the review date; the current specification should be checked before a launch.
The commercial document is the specification agreed with the buyer, the batch COA for the lot and the technical data sheet supplied with that lot. If this page and the agreed specification disagree, the agreed specification governs the order. The page exists to explain the reasoning behind the specification, so a quality, procurement or technical reviewer can see why each line is there.
The product hub for this grade is Steviol Glycosides 95%: specification, grades and documents. The release workflow is described on the quality and documentation page, and the analytical method behind the primary assay is listed in the method library.
Related documents
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.